Installation Instructions

4N1.1 Products

4N1.1 - 4 Analog Input to Average, Highest, Lowest or Difference Output

4N1.1-RS485 - 4 Digital Inputs to 1 Analog Output, RS485 Controlled and Monitored

4N1.1-Binary - 4 Digital Inputs to 1 Analog Output

ANP Products 

ANP Version 1 - 4 Analog Current\Voltage Input to 2 Analog Current\Voltage

ANP Version 2 - 4 Analog Current\Voltage Input to 2 Analog Current\Voltage

ATP Products

ATP-Relay - Relay Output

ATP-MVA4 - Analog to Triac for Controlli MVA4 Actuator

ATP-T - Analog to Triac Pulse

ATP-Y - Analog to Pulse for York CodePak Chiller Control Center

DMUX Products

DMUX - PWM to 4 or 8 Addressable Relays

DMUX4 Novar - Same as Above, Novar Input (4 relay)

DMUX4Solidyne - Same as Above, Solidyne Input (4 relay)

DMUX8 Novar - Same as Above, Novar Input (8 relay)

DMUX8 Solidyne - Same as Above, Solidyne Input (8 relay)

DRN4 Products

DRN4 - Multiple DDC to Proportional Resistance

DRN4-Solidyne - Solidyne Slow Pulse to Proportional Resistance

EFP Products

EFP - Floating Point to Modulated Pressure Output. Closed Loop, Bleed

EFP2 - Two Valve, Holds Pressure on Power Failure

EFP2FS - Two Valve, Exhausts Pressure on Power Failure

EPC Products

EPC - Analog (current or voltage) to Pneumatic (single valve, bleed)

EPC2 - Same as EPC (dual valve, controlled bleed), 750 scim Supply/Exhaust

EPC2LG - Same as EPC (dual valve, controlled bleed), 1400 scim (External Filter) Supply/Exhaust

EPC2GB - Pneumatic (0-20psi), Override Feedback, 750 scim Supply/Exhaust, Bracket mount

EPC2FS - Pneumatic (0-20psi), Override Feedback, 750 scim Supply/Exhaust, FailSafe

EPC2GFSB - Pneumatic (0-20psi), Override Feedback, 750 scim Supply/Exhaust, FailSafe, Bracket mount

EPW Products

EPW - Pulse Width Modulated Input to Pneumatic Output with Bleed Orifice

EPW2/EPW2FS - Pulse Width Modulated Input to Modulated Pressure Output
                        (Standard and Fail Safe)

EPW2FSG/E - Pulse Width Modulated Input to Modulated Pressure Output
                    (Fail Safe with Gauge)

IONLON

Lonworks - Four Digital Input / FourDigital Output Node Version 1

Lonworks - Four Digital Input / FourDigital Output Node Version 2

LAO Products

LAO v1 - One Analog Input and Output (Direct or Reverse acting) Lonworks Node

LAO v2 - One Analog Input to One Output Lonworks Node

LMP Products

LMP v1 - One Analog Input and Two Relay Output Lonworks Node

LMP v2 - One Analog Input to Floating Point Output Lonworks Node

 PHOLON Products 

Pholon v1 - Lonworks (4) Contactor Driver Node

Pholon v2 - Lonworks Contactor Driver Node

Pholon v2-rr - Lonworks Remote Relay Driver Node

PHOTON4 Products 

PHOTON4 v1/2 - RS485 to 4 Latching Relay Output

PHOTON4 v3 - RS485 to 4 Latching Schlage Relay Output

 PNP Products 

PNP0/1/5/7.1 - Lonworks to Pneumatic (single valve, bleed)

PNP2.1 - Same as Above (dual valve, controlled bleed)

PTA Products

PTA - PWM to Analog (current or voltage)

PTA-PPM - Waterflow Meter Pulse to Analog (current or voltage)

PTS3.3

PTS3.3 - Floating Point to Modulated Pressure Output, Closed Loop Control,
            Standard and Fail Safe

PTS3.3s - Floating Point to Modulated Pressure Output, Closed Loop, Bleed Type

PWP Products

PWP0/1/5/7.3 - PWM to Pneumatic (single valve, bleed)

PWP2.3 - Same as Above (dual valve, controlled bleed, standard & failsafe)

PWP2.3GFS/E - Same as Above (with gauge)

PXP Products

PXP0/1/5/7.3 - Analog (current or voltage) to Modulated Pressure (single valve, bleed)

PXP2.3 - Same as Above (dual valve, controlled bleed)

Return to Product Selection page

Specification Sheets

PHOLON Products

Pholon v1 - Lonworks (4) Contactor Driver Node

Pholon v2 - Lonworks Contactor Driver Node

Pholon v2-rr - Lonworks Remote Relay Driver Node

IONLON Products

IonLon v1 - Four Digital Input / Four Digital Output Node Version 1

IonLon v2 - Four Digital Input / Four Digital Output Node Version 2

Return to Product Selection page